YourDyno instrumentation kit

YourDyno instrumentation kit includes all you need for dyno data acquisition and brake control:

 

Features:

  • Data acquisition electronics box with USB interface
  • An S-type load cell for brake/absorption dynos (specify max load when ordering)
  • A hall-effect sensor for easy RPM measurements with shielded cable
  • 1 k-type thermocouple input (for engine or exhaust temperature)
  • 3 analog (0V-5V) inputs, for example for Lambda sensors, MAP, boost, etc
  • 2 RPM inputs
  • 2 Brake control outputs, each supporting either Pulse width modulation (PWM) and analog  (0-5V) signals. 1 output supporting Stepper motor
  • Manual brake control inputs (Brake on/off, RPM up/down) controlled by switches/buttons
  • Horsepower correction factor using to SAE J1349 (based on temperature, ambient pressure and humidity from manual entry or from optional environmental sensors)
  • Self powered from the USB cable, no external power supply
  • Easy to use FREE PC software with setup wizards and calibration options

      
Here you can see YourDyno in action.

Free software

Screenshots from the software below.


screenshot4

screenshot6

screenshot5



install

Check our Download page for software, firmware, drivers and an example data file.

Prices:

  • YourDyno instrumentation kit: NOK 5500/~$660
  • Environmental sensors option is NOK 400/~$50 and lets you compensate for environmental conditions
  • Load cell (choose your size): NOK 800/~$100
  • RPM sensor with cable: NOK 600/~$75

You can choose to pay in USD, EUR or NOK. USD and EUR prices vary with the exchange rate, plus there is a conversion fee of 2.5% if you pay in EUR or USD (same exchange fee as YourDyno has to pay to PayPal to convert to NOK). So if your native currency is not USD or EUR, it is better to choose to pay in NOK.

The complete kit including load cells and RPM sensors is normally in stock and will be shipped within a few days.

PayPalBuyItNowAdjusted

or ask your questions in our Q&A forum or in a mail to jostein@yourdyno.com

Selecting the right load cell

 

Calculate the right load cell size here:

kg

Specifications

  • Very accurate 16 bit AD converter (65536 different measurement levels)
  • Fast data acquisition (100Hz) on all channels
  • Supports from 1 to 100 teeth on trigger wheel (triggers on any ferrous material)
  • RPM resolution: 42 nano second
  • Supports any load cell (specify 10, 20, 50, 100, 200, 500 kg at checkout or use your own)
  • Connector for K-type thermocouple for exhaust or engine temperature logging. To log temperature buy a suitable thermocouple for example on eBay (search for EGT K-Type thermocouple)
  • 3 Auxiliary sensor inputs (0V-5V analog interface). See instructions on how to connect aux sensors here. Aux inputs can be used for for example Lambda monitoring, boost, temperature, etc.
  • Optional environmental sensors for automatic horsepower correction based on SAE J1389 (specify at checkout)
    • Ambient temperature sensor absolute accuracy: 0.5 ºC
    • Humidity sensor absolute accuracy: +/-3% relative humidity
    • Ambient pressure sensor absolute accuracy: +/-1hPa (equivalent to the ambient pressure difference of ca +/-10 meter vertical distance)
  • Support for 2 RPM sensors, 2 brakes and 2 load cells
  • Easy calibration

World-wide shipping. Invoice and payment by PayPal or Bank transfer (invoice).

Unfortunately, no sales to Russia due to export restrictions.

Select your currency
EUR Euro