Hi! i was wondering about why not adding warnings to the software according what user wants to add, i means, for example, all we know eddy brake are r...
go to print Setup, enable Header image, you can upload an image then play a bit until you stick it as you prefer.
Idk for the latest versions, i guees it is still the same, im using an older version but i was able to add a logo from the first yourdyno versions.
If you do it, please that can be dissable too ?
what i would do it is when i set manual mode, that autostart dissable automatically. when choice in my case power sweep, it enable automatically.
What's wrong with that? i can print dynosheets good . Potencia-y-Par-a-motor.pdf
I dont know here is the problem, it is VERY easy to use, just add comments, save everything, it's done.
I use both rpm sensors of each hub for everything, any problem for +2 years.
simple is BEST. that's what i learned from a guy that built his hub dyno some years ago, then decided to build mine. you can install more bearings, ...
it's all your design, i use motorcycle shocks... you have to choice the right ones according as i said your design, find one with the right travel (mi...
check with Sportdevice. i use 2 of these on my hub dyno +2 years with no problem.
Nop, spanish and a bit of english ;D
i think bigger has more advantages on a roller dyno but it could be expensivest.
for sure, just maybe you would have slippage problems but if you "knurl" your rollers that helps a lot. here in spain there are some companies makin...
try to speak in english if possible, so other people with same problems could be find this kind threads and be helpfull! or make below france language...
