Q&A Forum

Follow the suggestions I gave and let us know what you find. The cable or monitor or PC is the most likely cause I think, I have never heard of a prob...

Hi, OK, it can be as easy as a bad HDMI cable. If not, first check is whether the two power supplies (why two?) are isolated. They shall be, otherwi...

Hi, This is possible in the Sequencer Brake control plugin. Just set the brake % you want and for how long you want it.

Hello and welcome! The CC300 is a large brake, 1000kg load cell is good for that brake. Yes, don't go over the rated RPM, it is 3500 for this brake....

Hi guys, Here is YourDyno software version 3.2.144. The most important new feature is the internal dyno losses, see . There are a few other mino...

@jurlu96, this is a very old thread. Can you explain the issue you have?

Hi, the wheel torque is the torque measured at the wheels converted to engine numbers, meaning it divides by the gear ratio. If you want the torque at...

@oxracing, you enter the comments in the main window in the Comments column. This can be done any time after the run is complete. It is stored in th...

You can use a pressure sensor in place of a load cell (whetstond bridge type). You just need to be able to calibrate it with a known pressure and conv...

Hi there, A good starting point for many dynos is Kp = 0.5, Ki = 0.5 and Kd = 0.05. You can plot the different PID parameters vs Time to see which o...

Hi, Yes, the dyno losses functionality is next up! Note that it does not impact Engine power/torque, only Wheel power/torque. If your concern is w...

Hi, Nice to hear from you Olivier! Thanks for reaching out. I get many questions for prices for retarders. Do you have a price list? Cheers,Jost...

Here is an overview of the Klam brakes.  KLAM-KTD-retarder-overview-2.pdf

Hi, That's a cool application. No problem with the RPM, you just adjust the number of teeth on the trigger wheel appropriately. The best brake fo...

Tuners, YourDyno version 3.2.141 was released today. It cleans up a few issues, no new features. Changes: Run window location would sometimes ...