Pressure relife valve and cable for land and sea valve
Is there any pressure relife valve with 1" size that you recommend to a water brake?
l also wounder if anyone knowing which cable/connector it is on my land and sea valve?
Why don't you use the existing Land&Sea water brake valve you already have ?
lm going to use that valve as well.
The reason is when the land and sea valve is closed the water pump will still running and l think the pressure will be to high and also its not good for the pump to do that. so therefore l want to use a bypass valve. l dont want the pump to shut down when the pressure is correct to avoid fluctuation in pressure.
so l guess a bypass valve is the best for steady pressure.
or what do you think?
You need a pressure-reducing valve, to ensure you provide a stable pressure to the brake and flow valve. Also without the pressure reducing valve, the pump may overheat. The pressure adjusted output goes to the flow control valve and brake, and the other output goes back to the tank.
I think we bought ours from Land&Sea.
You mean the cable that goes to the Stepper controller box on the valve? It is just 2 power cables and 4 control wires. The power wires go to 24V (or 12V) and the control wires can connect directly to YourDyno.
You have such a valve and want to connect it to YourDyno? I can find the color combo if that is what you are after.