@admin, from one of the Manufakturers (KMS MD35) i have a DBC File. Maybe that can be helpful ?

I also work a lot with Ecumaster Black. I can extract a Stream with a sniffing tool if it helps.

Best Regards

Frank

I think what we need is a DBC to YourDyno format converter, or an import DBC format function...

CANTOOL Error

CANUSB drivers all installed and working but no connection possible.

ERROR: "Something went wrong with connection to adapter." pops up all the time when I try to connect

Anybody who experienced the same issue from the picture?

Thanks in advance!

Alex

Hi @tracktoys

Try installing this tool: https://yourdyno.com/USB_CAN%20TOOLSetup(V2.12).exe

Posted by: @admin

Hi @tracktoys

Try installing this tool: https://yourdyno.com/USB_CAN%20TOOLSetup(V2.12).exe

 

hi,

thanks!

What do I need to do with that tool? Installed it. But Operations - Start doesn't work and still same issue in yourdyno. Reinstalled driver for winUSB aswell.

BR

@tracktoys, did you get the CAN to work? Normally it is enough to install that USB_CAN TOOL Setup.exe, it includes the drivers you need and you can connect to your USB CAN adapter in that test program and in YourDyno. Do you see the device in Windows Device manager? 

Unfortunately not. Tried different sw version of the usb can drivers. It's recognized in the device manager correctly. Maybe the can usb adapter is faulty. I'll order a new one but try it on another pc beforehand.

OK. I have tested two adapters, both bought from here: https://www.aliexpress.com/i/32841301438.html, the plastic one and the metal case one, both are ok. 

Hi Guys, I use Ecumaster to CAN and the Chinese USB to CAN. This works so far, the lambda value is displayed on the screen. Unfortunately, the lambda value is not shown in the graph, and is it not shown in the table. What am I doing wrong?

Best Regards Frank

@motormapper check if you have the same name ("Lambda") defined as an Aux channel. Channels need to have unique names. 

@admin,

i think the Solution is right. It is exactly the same name as in the sreen.

The red Line on the ground is Lambda, when CAN Lambda is selected as visible Graph.

I will be buying a Your Dyno soon to retrofit a Land & Sea DYNOmite chassis dyno.

I plan to add MegaSquirt connectivity to the plugin, since I tune them frequently, and plan to use steady state tuning a lot.

Anyway, anything I can do to help with development I will pitch in. I also live close to ToAlan, so if there's a product he needs to test and shipping might make it more difficult, once my dyno is setup (Should be before the end of the year), then I can help with that too.

That BlueCAN looks interesting too. I might have to rework the code for an UNO, since I have a few of those kicking around.

Sounds good @six_shooter!

Any help on adding plugin support for new sensors would be great. A Megasquirt can bus config file would be nice also!

@tracktoys Did you ever find a solution?  I'm having the same problem.  When I plug the adapter into a different machine without drivers it comes up as "LYS USBCAN".  I can install the drivers and it says working properly, but YourDyno always says the same error you get, problem with connecting.