Q&A Forum
Bluetooth will work since it makes a com port. Have tested elm 1.5 Bluetooth adapter in workshop
They are really cheap on eBay here in the UK, I think you are in Oz?
What abor Bluetooth? I have one of those somewhere.
They work completely differently. More like how tcp works with serial hub app so connection would be made with an IP and port number. Do you have any technical info on it's protocol or one u could send me to reverse enginer.
Is it possible that Wireless ELM interfaces can be supported?
I had a quick look today and nothing appeared in the list of Com ports etc when i connected to my interface.
Thanks!
You need to hook a resistor between the signal side of the sensor and 5v to give you a voltage signal to the analog input channel if the ecu doesnt have pullup on that channel...
i see now you talk about yourdyno. Same goes here, calculate the right resistor and wire between signal and 5v...
If your wiring straight into ecu or using aux1/2/3 youd need an adapter to convert resistance range to voltage.
Other wise im using the EGT input on yourdyno for temperature stuff. should work with oil pressure resistance but dont quote me on that yet since havnt fully looked into it yet. More inputs will be added soon once I get the CAN EGT stuff to work on with my plugin.
Nice! i have a question, how do i can put a temperatura sensor that Works with resistance with the ecu? i means, since these inputs Works 0-5v, how do i can install a temp oil sensor?
thats really good, can be added a oil temp or oil press sensor too!
No worries, Was worth a try and my goal is to support every ecu I can.
Was hoping to release update A16 today with the serial hub stuff in it since works flawlessly on the test bench.
I just finished off testing it all on the dyno in live tuning conditions and there are far too many bugs in its current state that crash both serial hub and YourDyno if you click something in the wrong order. Or it loses connection during a run. So will be a little further off.
But I can say this, its a bit of a game changer.
Usually doing a ECU I have to wire my wideband into the ECU. Injecting the Dynos wideband into the datalogging stream I dont have to do that anymore.
And the latest beta of YourDyno allows you to sync the rpm with the datalogging streams so that makes it perfectly accurate compared to trying to hold car at XXXX rpm and click set ratio button.
Is a big pity, sorry for asking you for this plugin, take your time for nothing. Not nice at all from their part 😪
To all us it's legitimate Dyno software. I guess for them to recognize it it would need to get bigger and well known.
how does Yourdyno can be "legitimate dyno software"? To me it does already
Protocol Update:
Link Dyno Comms:
They wouldnt answer my emails and each time I gave them a phone call got the same answer that it should be alright and to send a email.
So I got one of there biggest dealers (Use to work at my work years ago) to ring them up. They gave him a straight answer and it was a No,
They dont think YourDyno is a legitimate dyno software and if they see any efforts to reverse engineer it to add support they will take legal action against me.
So really the only option would be if I can get a large enough group that want it supported to start a petition that YourDyno is a legitimate dyno software and that Links lack of support is driving us to use other ECUs.
a plugin as Tuner Nerd should me amazing to add to Yourdyno too 😀 Amazing work!