Description
The new excellent Spartan3 v2 with CAN bus, configured for YourDyno. Kit includes the Bosch LSU ADV sensor. The LSU ADV sensor provides a 20x resolution increase over the LSU 4.9.
2, 4, 6 or 8 (or any number) of WB controllers can be chained together via the CAN bus. They come programmed to work together with YourDyno with easy setup.
- CAN bus or Analog (Aux channel) connection to YourDyno
- 10ms Response Time
- 1x Programmable Linear voltage output for Lambda/AFR/%Oxygen
- 1x Programmable simulated narrowband output
- Compatible with Bosch LSU 4.9, Bosch LSU ADV, and clone LSU 4.9 sensors.
- Lambda range of 0.6[Lambda] to 3.4[Lambda], equivalent to 8.82[AFR] to 50[AFR] for gasoline
- %O2 range of 0%O2 to 21%O2
- Lean Burn mode for lean burn applications
- CAN Bus support for the following ECUs; Megasquirt 3, Adaptronic, Link, Haltech, HP Tuners, as well as YourDyno dyno controller are supported. More supported devices coming soon via firmware update
- CAN Bus output of Lambda or %O2
- Smart Heatup; RPM Triggered Heating of the oxygen sensor for MS3 ECU over CAN
- Smart Heatup; Temperature Triggered Heating, Spartan 3 will wait for the Oxygen sensor to be heated to 350C by engine exhaust gas before heating up the sensor
- Does not require Free Air Calibration but FAC is available. Recommended only for clone LSU 4.9 sensors
- Compatible with Torque OBD for Android to display AFR
- Onboard FTDI based serial-USB converter
- ARM Cortex M4
- 0.1% tolerance components for all components that affect accuracy
- 4 layer Printed Circuit Board
- Separate grounds and power connections for LSU Heater and electronics for improved noise performance and improved voltage protection
