Q&A Forum

@rub87 Im currently using sweep without PID and in my setup (100cc direct drive kart engine ) works fine in upward, from 6000rpm to 19000rpm. I only s...

@rub87 have you tried the sweep without PID control? Which kind of valve are you using?

How your setup works Is all clear and It Is the same way I want to use my dyno. I have a 1" flow valve controlled by stepper motor, I think It works ...

@admin now that Im thinking about, im in agree with you, I remember from my last dyno test, (about 4 years ago) that was not necessary Minus sign "-"...

Hi Hans, very nice setup, It works very well! I also have hydraulic dyno but without drum, I mount engine directly to dyno chassis. I think that the b...

Hi HansL, are you still using hydraulic dyno? Whic brake control mode are you using? Thanks Eric

Thankyou very much!!!

Hi, if you will find the pdf post here, it is usefull. Yoday I added the 2nd fan to drive out air from dyno cell, now the 2 fan drives out air at 3700...

Since when I moved bluebox out of dyno room I never had lost connection problem during test. I only still have noise on load cell at certain rpm only ...

The fan that drive out exhaust gasses is about 2000 m3/h. The fan that drive out air in my dyno cell is about 1800m3/h 220v. I think it is difficult t...

I use 2 fan, one in the exhaust silencer and one at the top of the room to drive out any other exhaust smoke. But in not completely satisfacted, there...

.. IMG-20191219-WA0010.jpeg

.. IMG-20191219-WA0012.jpeg

About 100 rpm/sec. Look my sex room IMG-20191219-WA0008.jpeg