Q&A Forum

Something like this should work with default CAN settings. Set speed to 500kbit/s.  Capture.JPG

@brian-lambert, you are right. I fixed it now, please install/span> Thanks for reporting.

@mikefries, yes not a problem. But it picks up the primary (12V) signal more reliably.

Hi folks, YourDyno software version 3.3.31 was released today. A much requested feature was added: Dark mode on the graphs. Right click and turn...

Hi, I am working on the CAN output! Coming 🙂

Hi, I would first try with a shorter cable. Maybe there could be a ground potential difference between the units too? You can try to pull a ground c...

Hi, you wire it into the EngRPM input. Just wire it directly. Then you set EngRPM to Engine RPM (inductive pickup) in the RPM settings, and configure ...

Hi! Sorry for the slow response, I missed this question. You should see the dracal-usb-get.exe file in the Dracalview folder, do you? Then you n...

Good inputs. I will add more deceleration options.

Hi folks! YourDyno software version 3.3.29 was released today. Changes: Ability to change the style of the channels in the graphs. You can se...

Nice! Yes, you can read frequency channels with YourDyno, and convert this to a flow channel. Let me know if you want to discuss any details.

Hi, Yes there are thermocouple to analog converters. For example

@stvdrag225 move one of the graphs to the right axis (drag the label with your mouse)

Ok, you will receive a Standard v5. It has a 20k input resistance. So if you add a ~40k resistor in series with the 12V input then you can read 0-15V....

Hi, That's possible with a suitable resistor divider. Which YourDyno version do you have? Open the box if you are unsure. I can let you know the ri...