Greetings tuners!

Software version 3.01.83 was released today. 

Changes:

• Much better noise reduction system. See this video for demonstration
• Support for hotkeys and wireless devices, see this video for demonstration
• Improved PID control: This improvement is for the D part of PID. D stands for Derivative, and is a parameter to dampen oscillations. Most Eddy brake setups will still work best with Pd = 0, but if cannot fix your oscillation issues by lowering the Kp and Ki you can try adding some Pd. Water brakes can work well with Kd. 
• Added a "Coast now!" feature. This can be useful when doing a sweep and logging data while retarding after the run to calculate the drive train losses. If you need precise control of when the brake turns off (i.e. exactly when you press the clutch), just press the "Coast now" button. It turns off the brake but continues to log data. This is optional to use, if your setup works well in auto mode, just continue with that
• Improved the speed of opening the Run window. No longer will the gauges flicker around before settling
• Fixed a bug where the font in the digital gauges sometimes was too large for the gauge display so parts of the numbers were cut
• Better error messages a few places and fixed a couple of minor other bugs

Enjoy!

Brake sweep also works well in my setup, for this reason I didn't understand where the bug was. 

Hi, there was someone who told me about a problem with the brake sweep, but I really tried to reproduce it unsuccessfully. So brake sweep works in my setup, let me know if you have problems with it.

Jo, time ago you spoke about  bug in sweep brake. Which was this bug? Have you fixed this bug? 

I confirm, now sensor working!

When you think the new release will be ready? can't wait to see new functions 🙂

Please upgrade firmware again, the Env sensor problem is fixed. 

adamkot85, you are right, there is a bug in 1.17 preventing the environmental sensors. I will fix!

Still I can't turn on "use sensor data" "Pressure and Humidity sensor attached:" is "No".

Is it possibility to downgrade software to 3.01.78 and firmware to 1.16?

Hi, yes just right-click on the link above and save it to a usb drive and run it from there. You must download the firmware also, it is here: https://www.yourdyno.com/YourDyno_1.17.cyacd . You must right-click and save as YourDyno_1.17.cyacd and then when upgrading the firmware click "Upgrade firmware using downloaded file". 

After update to 3.01.80 I  have in "Pressure and Humidity sensor attached: No" before I had "Yes"!

Will that link update my existing version or will I need to re-enter all my current settings?

When I attempt to download the new update, I get redirected to this Error 404 page......

https://yourdyno.com/YourDynoInstaller_3.01.80%20%20%20%20.msi

Jeff

Yes, both brakes will brake the same amount. This can be a good option for cars with limited slip diff. For open diffs, you will want separate control of the wheels.

Locking brakes sound really really good, it's like a sync mode, does it?