Good idea on the inertia. Possibly have inertia set like today which represents the dyno's inertia, but with an additional car based inertia that can be set per car. 

Bmgjet, yes, I see this can be improved as well. I would be happy for some demo code that I can get going with. 

Jostein if your going to re-work the profiles stuff, It would be nice if you simplified it a little further.
Lock main dir as a selected location in the options. New Profile button opens input box to enter name and makes folder in that name for you.
Double click profile opens it.

My Documents is where I have mine set to go, And its a mess with a little over 200 folders now. Some profiles also always ending up with in different cars profiles when one of the other works has clicked wrong thing in wrong order.

I could probably make you a demo in C# of what I mean.

@Dev At the moment if you need to edit them you can print dyno sheet to image first, Then edit it in something like Paint and print from there. Thats what I do.
One dyno day I had and wanted to water mark every dyno sheet I saved them as pdf and had foxit pdf editor watermark automatically and print them when a pdf would show up in its input folder..
A litte more work doing that but it keep the hardware requirements to show graphs down. As it is my dyno rooms computer struggles with 12 graphs. Makes it hard for who to kick off the leader board.

Couple of practical points for those of us that test a lot of cars:

Inertia saved in sessions:

with light rollers, the intertia of the vehicle can be a large contribution, so it would save a lot of time to have this setup for different vehicles.  An SUV has a much higher intertia than an AWD Golf.

Freely editable text and images:

An option to insert an image and text onto the graph, for example a picture of an arrow to point out a specific part of the curve then some text as a note.  Car logo's could also be used.

Thanks!

Greetings tuners!

Software version 3.2.22 was released and can be found on downloads page. 
https://yourdyno.com/YourDynoInstaller_3.2.22.msi

Changes:

• RPM can be synced with ScanTool plugin.
• Backend changes for Plugins
• Backend changes for brake control.
• New brake mode (read instructions from with in run screen)
• Lots of bug fixes.

And remember this is a Beta release.
Enjoy!

Posted by: admin

Greetings tuners!

Software version 3.01.83 was released today. 

Changes:

• Much better noise reduction system. See this video for demonstration
• Support for hotkeys and wireless devices, see this video for demonstration
• Improved PID control: This improvement is for the D part of PID. D stands for Derivative, and is a parameter to dampen oscillations. Most Eddy brake setups will still work best with Pd = 0, but if cannot fix your oscillation issues by lowering the Kp and Ki you can try adding some Pd. Water brakes can work well with Kd. 
• Added a "Coast now!" feature. This can be useful when doing a sweep and logging data while retarding after the run to calculate the drive train losses. If you need precise control of when the brake turns off (i.e. exactly when you press the clutch), just press the "Coast now" button. It turns off the brake but continues to log data. This is optional to use, if your setup works well in auto mode, just continue with that
• Improved the speed of opening the Run window. No longer will the gauges flicker around before settling
• Fixed a bug where the font in the digital gauges sometimes was too large for the gauge display so parts of the numbers were cut
• Better error messages a few places and fixed a couple of minor other bugs

Enjoy!

Hello,

Can you post the changes made in the latest sw release, please

Regards

The firmware update issue is solved now.  http://yourdyno.com/YourDynoInstaller_3.2.10.msi

Bajudo,

There was 1 more person reporting that today. Is your error message that it cannot find Bootloader_UtilsWin32.dll? 

I will look at it tonight.

In the meantime, try to uninstall and download the previous version (3.2.08, just modify the link), upgrade firmware and then upgrade the software again. 

Anyone having problems with firmware update?

Me too. 

I would like to control the radiator fan (12v) in function of thc temperature. 

I would like to brake the rollers after finish of run test (I have 2 large rollers about 2700kg). something like a brake curve from 4500rpm to 500 rpm, but for inertia dyno setup. this can be possible if brake controller setup menu will be available for inertia dyno.

there is an option to use brake dyno and set inertia value in compensate for inertia effects.... menu but have not tested

I would like to control pneumatic platform with protect, when RPM<5km/h logic allow press bottom pneumatic platform up. Control intake fan simple on/off.

Guys,

Functionality for the digital inputs/outputs are coming. 

The idea is to be able to control outputs using logic of RPM within a certain value, brake on/off, press of a button, Anx values within a certain value, etc. 

Let me know the functionality you would like.

Posted by: adamkot85

Thanks for new software!

I waiting to added programing digital output to control cooler fan and pneumatic platform.

Im working on a plugin system for this sort of stuff myself.
4 extra outputs which ill be using as.
Intake Fan
Retarder Fan
Pneumatic Brake
Warning light.

Can set the manually or trigger them based on a condition of aux inputs into "yourdyno" bluebox.

Thanks for new software!

I waiting to added programing digital output to control cooler fan and pneumatic platform.