Q&A Forum
Pretty low only like 1000 to 1200 is what it reads..
I'm unsure what your asking...the motors turn about 12,500rpm...the brake will only pull the motor down to about 8000rpm but thats in 6th gear WOT...
This one has 2 electric valves ran off a push button...when running a low tourqe bike say around 15ft lbs andand tha only geared to do about 50mph in...
Is there any other options out there ? I'm not opposed to buying this one but shipping to the states is almost as much as unit itself..seems like the...
Sorry I have not had time to get on in a while..is the software ready to use a true Rpm signal of off the Motor? If so what is all needed to make it w...
I can later today
It will not open in your Dyno either...it only shows me a bunch of numbers and letters
I would just like to be able to save them and go back later and look at them...they do save but I cannot view them just shows me a bunch of letters a...
Sorry I thought I quoted the admin...it was to him
What else will be needed to make this work with your Dyno software?
We ran a Cvt on this dyno tonight and locked the variator to only open up so far but keep low gear and did our Rpm readings there.. We are still getti...
I would think taking a true engine rpm reading would fix this issue instead of using a caluculated rpm reading..if not could you please explain?
ReportDelete Ok I got the Rpm set in the run screen...The tach on my screen matches the tach rpm on my bike up until about 8800rpm them it stops ...