Q&A Forum

I didn't do the math because it was harder to take those measurements but the result should be the same. The distance from the retarder center to the ...

THANK YOU for your help!!! The solution you have provided has worked just perfectly!!! The master channel must be TIME so that TPS vs RPM AFR data...

Please, keep in mind that my dyno and tuning knowledge and experience are 100% self-taught. The way I work comes just from my own ideas about how th...

Thank you very much for the fast answer on Saturday! I'm starting my learning on UnaVision and, on the worst case scenario, I can use my Zeitronix d...

VERY interesting! Thank you!  

I can't see the picture of the phonic whell. I upload it again  WhatsApp-Image-2026-03-05-at-12.08.48.jpeg

MY COMPUTER Although the fanless computer I used with the older software and electronics worked well, it was too slow according to YourDyno specs. T...

What it looks like once everything fitted.  WhatsApp-Image-2026-03-05-at-12.08.48-4.jpeg

CONNECTION BOX These three inputs (RPM pickup, CAN line, TPS) must be accessible from outside the cabinet, so I bought a cheap aluminium electronic ...

RPM PICKUP As my dyno was supplied with a RPM pickup, I tested it with YourDyno and it works perfectly. I found out that one of the pins in the orig...

LOAD CELL Although my dyno has a retarder from stock, the load cell and torque electronics module are an option my unit didn’t have. As the EX+ elec...

RPM sensor issues. In the first test of the YourDyno software, the I got no drum RPM reading. Jostein explained me how to check the sensor and every...