Hi folks,

YourDyno version 3.3.85 is out, fixing the issues where YourDyno would not start up.

Cheers,
Jostein

Yes, uninstall and install 3.3.81 or earlier. 

https://yourdyno.com/YourDynoInstaller_3.3.81.exe  

I have also issues with start the programm after update to version 3.3.84.

Hi,

Another very small release, YourDyno version 3.3.84. It addresses an issue one person reported on YourDyno not starting up.

Hi,

YourDyno 3.3.83 was released with just a very minor fix

• Fix of the KMTronic plugin introduced in 3.3.82

Folks, 

YourDyno software version 3.3.82 was released today. 

Changes since 3.3.81:

• Ability to use a physical button to start/stop runs. See Options->Hotkeys. Two modes are supported
  • Click to start and click to stop
  • Hold button for the duration of the run, where run is started when the button is pressed and stopped when the button is released
• PTH200 plugin (weather station for YourDyno v4 hardware) was fixed
• Zero calibration of Aux channels now works for all channels (previously only aux channel 1

A physical button can be connected it to an unused RPM input or other Digital input. The button should be connected between Signal and 0V, such that pressing the button shorts Signal to 0V (creating a "0"). When not pressing the button, the signal will be "1" due to the internal pullup.

Any data channel can be used to to start and stop runs, it does not need to be a button. 

Enjoy!

Folks,

YourDyno software version 3.3.81 (beta) was released today.

Changes:

• A number of improvements to the gauge layout functionality
  • Save/Load console (gauge layout and setup)
  • Select a number of gauges and modify all selected gauges at once in terms of gauge type, size, position, range, colors, alarm, etc
  • Align gauges horizontally, vertically, distribute position evenly etc. 
  • Undo gauge setup changes
• Hotkeys for the Run/Gauge window now work also if the Main window is active. Previously the Run/Gauge window had to be active for the hotkeys to work
• Zero calibrate button for Aux gauges
• Graphs ends are now trimmed to max RPM. This is nice if you stop the run before reaching the end RPM
• Improvement to the PID algorithm when brake was at 100% when starting the run

See  https://youtu.be/RZeEIqw5EYg

As always, any issues let me know!

Cheers

Awesome stuff, i love this system so much, fast becoming one of the best dyno systems Worldwide now

Awesome stuff, i love this system so much, fast becoming one of the best dyno systems Worldwide now

Fantastic upgrade! These are the features I was missing earlier!

Tuners,

YourDyno software 3.3.79 (beta) was released today. Changes:

• Added a new plugin for Brake Specific Fuel Consumption. Previously BSFC had to be calculated using a math channel, which means you needed to know the (somewhat complicated) equation. Now it is much easier. BSFC requires a fuel flow meter. PS: Make sure to delete the BSFC math channel if you already have one defined
• Fixed the Bar gauge, which had been broken in the previous release
• Improved the labels in the Bar gauge

Enjoy!

PS: An upgrade to the graph system as requested, it is underway (with background image, etc)

I've just noticed a bug, when you smooth out/edit the graph to reduce spikes, the peak figures by the description fields are not updated.

Folks,

YourDyno software version 3.3.78 (beta) was released today. Changes:

• Ability to turn on and off data recording with the push of a button. This is useful in very long runs, or when doing steady state at different RPMs. You can let the RPM stabilize and turn on recording for some seconds, then turn off recording and move to the next RPM, let the RPM stabilize and start recording again, etc. This gives nice, clean graphs with only data in the periods of interest
• Ability to compress the data set by down sampling. This is useful for very long runs (can be hours), to avoid the dataset being very large and slow. See Options->Data logging
• Improved Gauge data filtering functionality. Gauge filtering now affects all gauges, not just Torque and Power as was the case before, see Options->Noise filtering
• Select graph channels list is not shown by upon startup
• Some other minor cleanups and speedups 

Enjoy!

Posted by: @elmepro

↑

Can we get proper graph header? like it would be cool to import .png image, and also if passible change graph background image.

Right now if i want present graph its kinda basic.

thanks!

I second this.

Can we get proper graph header? like it would be cool to import .png image, and also if passible change graph background image.

Right now if i want present graph its kinda basic.

thanks!