Q&A Forum

Don`t bother with gear ratio and results vs rpm as slip in the converter will affect these anyway. Lock the transmission in a suitable gear and use re...

Hi! After using Yourdyno for a couple of months now I got a couple of software mods/features that at least I think could be useful: 1. Access to corre...

Well, found the problem.... My inductive clamp shielded cable has a resistor between the shield and signal wire. As I connected the shield to the comm...

Hi again! After wiring it up and mounted in a enclosure the bluebox read constantly 10000rpm when it was connected, after swapping to an shielded cabl...

I tried feeding Yourdyno the output from the vr conditioner and it worked great! So Jostein, what is the supplied voltage for the RPM 1&2 V+ conne...

I`ll do that when it`s finished. I used a Speduino and wired in the inductive clamp for testing, and as long as the speduino sees the 0-5V square sig...

It`s just a rough scetch as for now, but I will start detailing it as I will begin building it as soon as the materials start arriving 🙂

Something like this? Skjermbilde.JPG

Got a reply from Telma yesterday and it is a CC160 (in standard version) 🙂 So I`m looking forward to getting the telma next weekend! The next ting i...

Looks like it is most likely a CC160 as far as I`ve found out as well. It will (hopefully) be taken out from the bus next weekend so it should be easy...