Q&A Forum

Folks, For those of you with YourDyno Standard v5 with firmware 2.11, please click Options->Firmware upgrade->Upgrade to latest online. It wil...

No problem using a calibration arm that points upwards in some angle. However, if the arm is for example 45 degrees up, it only applies half the load ...

Digital outputs are channels with names, you can turn on their gauges

Correct, channel names must be unique and brackets "(" and ")" are not allowed in channel names because they are used when indicating the unit, like t...

Hello, The problem here was too short retardation phase. When measuring the retardation drag/losses, you need to let the car coast down to the start...

For v4: Out1 OutA -> PUL+Out1 OutB -> DIR+Out1 0V PUL- and DIR-

@bendd and others about the graph colors, here is the plan. In the Visual Styles option there will be 10 columns for color. This will cover 10 Runs. F...

Hi guys, YourDyno software version 3.3.56 was released today. Changes: More color options: Ability to set background color of the gauge scree...

Hi, This is because the noise filtering dulls all sharp changes out. You can try to reduce the noise filtering, or use the very latest software (3.3...

Check that the RPM1 jumper inside the box is on VR, not Digital

Hi, The Superflow RPM sensor can be connected directly to the VR RPM input on the YourDyno Ultimate. The air and fuel turbines can be connected to...

Yes, go to Options->Backup options to file on your old PC. Then on your new PC you do Options->Restore options from file

Folks, disappearing gauges fixed:/p> Thanks again. I also updated the link here for those who need an offline firmware update/p>

Folks, thanks for the feedback about the disappearing group gauges. I reproduced the issue; it happens when you start YourDyno with the blue box disco...

Folks, 3.3.51 is released. A small update to take care of a bug in the sequencer and MOI wizard. Better German translation is added too.