Q&A Forum

I answered this some other places too, but yes you connect directly to the ECU, nothing special needed. Define the channels you want to export from th...

@abuen 200kg is probably good there, but if you find any data on the max torque of the retarder then we can calculate more accurately

No it is not made for a VR sensor. There are VR to Digital converters if you need to use a VR sensor.

@osi, I checked your config file. RPM2 was set to Load cell2 RPM, which is incorrect. Load cell2 RPM is used in case you have two load cells. In your ...

@rub87, the EngRPM input is designed for an inductive pickup, but it may work with other sensors too. I will update the manual

That is correct. Either enter 48cm and 20kg, or enter 16cm and 60kg. The latter is more in line with the text on the screen ("Torque arm length to loa...

@osi, one more thing to check. Save your options and open it in a text editor. Search for autoSetGearRatio and if you find it, set it to false. Read b...

Hi, There are a few ways to do this. The process is to zero calibrate it with no load, then load calibrate it, the press Save. The problem is normal...

@osi, RPM2 must be configured as Other RPM channel if you use it as the Engine RPM pickup, otherwise it will not show up in the Gear ratio drop down. ...

Yes, cores rule :-).

Correct, a really good CPU mark is 10000, but 5000 works too. You want 4 cores or more so that you can split the work over several cores (calculating ...

Hi folks, YourDyno version 3.3.57 was released today (beta). Changes: Individual noise filtering for each channel. Check out Visual Styles. N...

@angelo, it is a good idea to implement this as an extension to the Sequencer. So instead of time advancing the run, you press a button to advance to ...

@six_shooter Yes, that is the point. You key in the horizontal distance, that is what matters for the calibration arm. Think of it in terms of what to...