Q&A Forum

Jostein
@admin
Admin
Member
Topics: 26 / Replies: 1357
Reply
RE: Latest software version

Folks, YourDyno software version 3.3.78 (beta) was released today. Changes:Ability to turn on and off data recording with the push of a button....

2 days ago
Reply
RE: Latest software version

Folks, YourDyno software version 3.3.75 was released today. A minor release. Changes:Avoided recalculating averages every time the Options menu...

2 weeks ago
Reply
RE: Help to setup dyno correctly 1:3 ratio

The only thing you need to do is to set 10 as the Pulses per revolution. The rest is as normal. You can measure the MOI using the wizard or manually a...

2 weeks ago
Reply
RE: Stuska conversion questions

The rotary dial is purely optional, but it can be used to manually control the load (either by varying the VFD frequency or the valve opening). Nice f...

3 weeks ago
Reply
RE: Stuska conversion questions

Hi, YourDyno can control the VFD if you prefer, but we recommend removing the VFD and just have an on/off switch for the pump, and instead use the Y...

3 weeks ago
Reply
RE: Water/Oil temperature thermistor setup

Seems a space has snuck into the links there, just remove them

3 weeks ago
Reply
RE: DynoJet 150 CAN Bus for multiple EGT on Standard V5 with built in CAN

Yes, the EGT to CAN from ECU Master works well. It connects to YourDyno CANL and CANH and needs a separate 12V power supply. You can add more CAN modu...

3 weeks ago
Reply
RE: Having trouble with correlation

@james-meyers MOI varies a bit from engine to engine. Most people don't change it for engines of reasonably similar type, but if you have very differe...

3 weeks ago
Reply
RE: Having trouble with correlation

Hi, The difference is likely in the Moment of Inertia. To double check this theory, do a test at steady state. The two systems shall read the same. ...

3 weeks ago
Reply
RE: Interference sending the gauges wild!

Sounds like you have some sort of grounding issue. The YourDyno box is usually grounded through the load cell shield, otherwise connect one of the shi...

4 weeks ago
Reply
RE: Water/Oil temperature thermistor setup

Hi, Here is the rmp file for the YourDyno thermistor for use with the YourDyno standard: ourDynoThermistorDegC_Standard.rmp I will add all the var...

4 weeks ago
Reply
RE: superflow 901 rpm sensor

Folks, the correct connection was: Yellow Shield, Black 0V, White Signal. The colors vary a bit.

4 weeks ago
Reply
RE: Software/firmware updating from old version

All the can bus configurations are stored here: C:\ProgramData\YourDynoPlugins\ControlCAN.dll.json Settings for the old version are preserved when u...

1 month ago
Reply
RE: ultimate firmware

You mean the water brake valve zero position sensor? It can be connected to RPM2, 3 or 4 if Freq 1 and 2 are used.

1 month ago
Reply
RE: Water/Oil temperature thermistor setup

Hi, Open the box, move the pullup jumper.

1 month ago
Page 1 / 94
Select your currency